Made from a solid piece of aircraft-grade aluminum, the HD resists rust, is incredibly strong, and surprisingly light. It looks fantastic on your truck, and commands attention with its hand polished, mirror finish. If you are looking for a heavy duty ball mount that is tough enough for your heaviest toys and made to fit your 2-1/2" receiver, look no further. You will not find a stronger, higher quality ball mount than the Simple HD. Proudly made in America. The Flash™ Simple HD is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability, and peace of mind. The Simple HD is rated at 1,800 lb. max tongue wt. and 18,000 lb. max trailer weight, making it the strongest aluminum ball mount on the market. The Flash™ Simple HD is made to fit your 2-1/2" receiver and includes 2" & 2-5/16" chrome hitch balls, making it a great choice for towing multiple trailers.

Hook up with any trailer in town with the Trimax Aluminum Adjustable Ball Mount Hitch. Adjusts up and down in 1" increments and locks securely in place. Built from premium aluminum and polished to a pristine shine. Rated for up to 10,000 lbs. GTW and 1,500 lbs. tongue weight. Comes with a locking hitch pin and a dual-head hitch ball 2-5/16" and 2".

Constructed from solid, forged steel for superior strength. Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1-1/4" tongue hole size. Protected by a highly durable powder coat finish. Trailer ball and hitch pin sold separately.

Fits trailer hitches with a 1-1/4" x 1-1/4" receiver tube opening. Equipped with a 3/4" tongue hole size. Protected by a durable powder coat finish. Trailer ball sold separately. Includes Pin and Clip

Eliminate the excess movement between the receiver hitch and the ball mount, tow bar or drop/rise receiver with the hitch immobilizer. The hitch immobilizer is available in two styles for either 2” or 2 ½” receivers. It works on any receiver hitch and installs in seconds.

Titan®, Ball Mount, 2-1/2" Sq. Hollow Shank, 13,000 - 14,000 lbs. GTW, 1-1/4" Ball Hole, Black

The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.

Fastway® Flash™ Simple ball mounts give you lightning-quick adjustments and stunning good looks. Each Flash ball mount is precision-machined in the Mountain West with the highest quality materials, making it stronger and longer lasting than other aluminum ball mounts. If you are looking for a strong, reliable and attractive pin-style ball mount, look no further. The Fastway Flash Simple ball mount is superior in strength and craftsmanship, and its hand polished aluminum outshines the competition with a gorgeous, mirror finish. Proudly made in America. The Flash™ Simple is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability and peace of mind. The Flash™ Simple is made to fit your 2" receiver and includes 2" & 2-5/16" chrome hitch balls, making it a great choice for towing multiple trailers. 10,000 lbs. GTW. Tow up to 8,000 lbs. with the 2" ball and up to 10,000 lbs. with the 2-5/16" ball.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes 1-7/8", 2" and 2-5/16" eliminate the need for multiple ball mounts.

Hitch Step for Adjustable Ball Mounts. Unlike other Hitch Steps on the market, our Blue Ox Hitch step is designed to ride along with the ball in place. So you can spend less time on your hitch configuration and get immediate access to your truck bed. Includes: 5/8 pins with clips.

Lowers or raises the 2" receiver connection to allow the tow bar to be level when towing. For use with tow bars only.

2" Receiver, Adjustable Drop Receiver Add-On. Add an extra receiver to your BX88379 and BX88340. Adjustable Rise/Drop receiver for bike racks or other accessories when you are flat towing with a tow bar.

Stows under the vehicle when not in use. Fits any standard 2-1/2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes 1-7/8", 2" and 2-5/16" eliminate the need for multiple ball mounts.

Stows under the vehicle when not in use. Fits any standard 2-1/2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes 1-7/8", 2" and 2-5/16" eliminate the need for multiple ball mounts.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes 1-7/8", 2" and 2-5/16" eliminate the need for multiple ball mounts.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes 1-7/8", 2" and 2-5/16" eliminate the need for multiple ball mounts.

Adjustable height - Perfect for towing multiple trailers of varying heights and couplers • Height adjusts up to 10.5” • Rated to 14k GTW • 1-7/8” (2K rating) , 2” (10K GTW), and 2-5/16” (14K GTW) Hitch balls • Fits 2” receivers and rated up to 14K GTW • Cast shank, variable height capability • Integrated hitch step with grip pattern • Knurled bolt pins with secure lanyard • Black powder coat finish.Dimensions: 12.63" L x 9.88" W x 6.75" h

This Towing Kit is all you need to get started. It includes a Black Powder Coated Reversible Ball Mount (2 drop, 3/4"rise, 8-1/2"length) rated at Receiver Lock and a Convenient Plastic Storage Case.

Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1" tongue hole size. Protected by a durable powder coat finish. Trailer ball and hitch pin sold separately.

Fits trailer hitches with a 1-1/4" x 1-1/4" receiver tube opening. Equipped with a 3/4" tongue hole size. Protected by a durable powder coat finish. Trailer ball sold separately.

Adjustable utility draw features 500/5,000- lbs. Rating and 13-3/4" height adjustment capacity. 1" shank hole. 13-1/2" L x 6-1/4" Rise x 7-1/2" Drop.

Titan®, Ball Mount, 2-1/2" Sq. Hollow Shank, 13,000 - 14,000 lbs. GTW, 1-1/4" Ball Hole, Black

Titan®, Tri-Ball Ball Mount, 2-1/2" Sq. Hollow Shank w/Black 1-7/8", 2", & 2-5/16" Balls, Black.

Fastway® Flash™ Simple ball mounts give you lightning-quick adjustments and stunning good looks. Each Flash ball mount is precision-machined in the Mountain West with the highest quality materials, making it stronger and longer lasting than other aluminum ball mounts. If you are looking for a strong, reliable and attractive pin-style ball mount, look no further. The Fastway Flash Simple ball mount is superior in strength and craftsmanship, and its hand polished aluminum outshines the competition with a gorgeous, mirror finish. Proudly made in America. The Flash™ Simple is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability and peace of mind. The Flash™ Simple is made to fit your 2" receiver and includes 2" & 2-5/16" chrome hitch balls, making it a great choice for towing multiple trailers. 10,000 lbs. GTW. Tow up to 8,000 lbs. with the 2" ball and up to 10,000 lbs. with the 2-5/16" ball.

Fastway® Flash™ Adjustable Locking Ball Mounts (ALBM) give you lightning-quick adjustments, offer superior strength, maximum theft protection and stunning good looks with its hand-polished shine. The dual 2" & 2-5/16" hitch balls make towing different trailers a snap, thus; the O-Ring sealed overlapping stainless steel slide pins have been shear tested to 20,000 Lb. Each ALBM is precision-machined and there is no other aluminum ball mount on the market that is stronger, better built, or harder to steal. 1,000 lb. max tongue weight. / 10,000 lb. max trailer weight. Limited 1 year warranty.

Stows under the vehicle when not in use. Fits any standard 2-1/2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes, 2" and 2-5/16" eliminate the need for multiple ball mounts.

Designed for use with round or trunnion style weight distribution hitches.

Adjustable ball mounts are the way to go if you have more than one vehicle to tow by adjusting the ball height. Ideal for towing multiple trailers without having to switch out the ball mount. Simply adjust the drop height to the height of your trailer. While fixed ball mounts have a set rise and drop, the rise and drop on adjustable ball mounts can be altered to accommodate different coupler heights. Features: Adjustable in height for level towing, Pre-installed 2" ball, Will not drag on the ground, All-steel construction. Includes: clamshell ball to convert the mounted 2 inch ball into a 2-5/16" ball.

Adjustable ball mounts are the way to go if you have more than one vehicle to tow by adjusting the ball height. Ideal for towing multiple trailers without having to switch out the ball mount. Simply adjust the drop height to the height of your trailer. While fixed ball mounts have a set rise and drop, the rise and drop on adjustable ball mounts can be altered to accommodate different coupler heights. Features: Adjustable in height for level towing, Pre-installed 2" ball, Will not drag on the ground, All-steel construction. Includes: clamshell ball to convert the mounted 2 inch ball into a 2-5/16" ball.

Class V, One-Piece forged hitch ball mounts for 3 inch receivers. Designed to handle heavy-duty loads. Black powder coat; Angled easy load design. 1-1/4" Ball Hole Size. GTW 21,000 lbs, TW 2,100 lbs.

Stows under the vehicle when not in use. Fits any standard 2-1/2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes 1-7/8", 2" and 2-5/16" eliminate the need for multiple ball mounts.

The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.

Adjustable ball mounts are the way to go if you have more than one vehicle to tow by adjusting the ball height. Ideal for towing multiple trailers without having to switch out the ball mount. Simply adjust the drop height to the height of your trailer. While fixed ball mounts have a set rise and drop, the rise and drop on adjustable ball mounts can be altered to accommodate different coupler heights. Features: Adjustable in height for level towing, Pre-installed 2" ball, Will not drag on the ground, All-steel construction. Includes: clamshell ball to convert the mounted 2 inch ball into a 2-5/16" ball.

Constructed from solid, forged steel for superior strength. Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1-1/4" tongue hole size. Protected by a highly durable powder coat finish. Trailer ball and hitch pin sold separately.

Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1" tongue hole size. Protected by a durable powder coat finish. Trailer ball and hitch pin sold separately.

Class V, One-Piece forged hitch ball mounts for 3 inch receivers. Designed to handle heavy-duty loads. Black powder coat; Angled easy load design. 1-1/4" Ball Hole Size. GTW 21,000 lbs, TW 2,100 lbs.

Great for truck campers with extended overhangs, extends the hitch box out by 24”, 34” or 38”, comes 38” in length and can be cut to 34” or 24”.

Tri-Ball Ball Mount, 2" Sq. Hollow Shank w/Chrome 1-7/8", 2", & 2-5/16" Balls - Chrome.

Hitch-Pin Style Polished Aluminum Ball Mount Class V - 2,000lbs. Tongue /13,000 lbs Trailer.

Complete adjustable ball mount. Hitch ball not included

Eliminate the excess movement between the receiver hitch and the ball mount, tow bar or drop/rise receiver with the hitch immobilizer. The hitch immobilizer is available in two styles for either 2” or 2 ½” receivers. It works on any receiver hitch and installs in seconds. NOTE: The Immobilizer™ II does not work with the 2019-Current Ram 2500/3500 pick-up due to improper clearance on the receiver.

Proudly made in America. The Flash™ Secure HD is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability, and peace of mind. Fastway® Flash™ Secure HD Ball Mounts give you lightning-quick adjustments, maximum theft protection and stunning good looks. The dual hitch balls make it easy to tow multiple trailers and the strength and durability of the Flash™ Secure HD offers years of dependable towing. The dual lock mechanisms eliminate the need for a separate hitch pin and are corrosion resistant. The locks are easy to operate, and built with a tethered cover, so you know your dual locking ball mount will withstand years of weather, use, and corrosion. Each Flash™ Secure HD is precision-machined in the Mountain West, making it stronger and longer lasting than any other aluminum ball mount. The Flash™ Secure HD is made to fit your 2-1/2" receiver and includes 2" & 2-5/16" chrome hitch balls. 1,800 lb. tongue / 18,000 lb. trailer weight capacity.

Fastway® Flash™ Adjustable Locking Ball Mounts (ALBM) give you lightning-quick adjustments, offer superior strength, maximum theft protection and stunning good looks with its hand-polished shine. The dual 2” & 2-5/16” hitch balls make towing different trailers a snap, thus; the O-Ring sealed overlapping stainless steel slide pins have been shear tested to 20,000 Lb. Each ALBM is precision-machined and there is no other aluminum ball mount on the market that is stronger, better built, or harder to steal. 1,000 lb. max tongue weight. / 10,000 lb. max trailer weight. Limited 1 year warranty.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes 1-7/8", 2" and 2-5/16" eliminate the need for multiple ball mounts.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes, 2" and 2-5/16" eliminate the need for multiple ball mounts.

Adjustable height - Perfect for towing multiple trailers of varying heights and couplers • Height adjusts up to 10.5” • 2” (10K GTW) and 2-5/16” (14K GTW) Hitch balls • Fits 2” receivers and rated up to 14K GTW • Cast shank, variable height capability • Knurled bolt pins with secure lanyard • Black powder coat finish.Dimensions: 12.63" L x 9.88" W x 6.75" h

Stows under the vehicle when not in use. Fits any standard 2-1/2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes, 2" and 2-5/16" eliminate the need for multiple ball mounts.

Adjustable ball mounts are the way to go if you have more than one vehicle to tow by adjusting the ball height. Ideal for towing multiple trailers without having to switch out the ball mount. Simply adjust the drop height to the height of your trailer. While fixed ball mounts have a set rise and drop, the rise and drop on adjustable ball mounts can be altered to accommodate different coupler heights. Features: Adjustable in height for level towing, Pre-installed 2" ball, Will not drag on the ground, All-steel construction. Includes: clamshell ball to convert the mounted 2 inch ball into a 2-5/16" ball.

Lowers or raises the 2" receiver connection to allow the tow bar to be level when towing. For use with tow bars only.

Hook up with any trailer in town with the Trimax Aluminum Adjustable Ball Mount Hitch. Adjusts up and down in 1" increments and locks securely in place. Built from premium aluminum and polished to a pristine shine. Rated for up to 10,000 lbs. GTW and 1,500 lbs. tongue weight. Comes with a locking hitch pin and a dual-head hitch ball 2-5/16" and 2".

Stows under the vehicle when not in use. Fits any standard 2-1/2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes, 2" and 2-5/16" eliminate the need for multiple ball mounts.

Fits trailer hitches with a 1-1/4" x 1-1/4" receiver tube opening. Equipped with a 3/4" tongue hole size. Protected by a durable powder coat finish. Trailer ball sold separately. Includes Pin and Clip.

Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1" tongue hole size. Protected by a durable powder coat finish. Trailer ball and hitch pin sold separately.

Constructed from solid, forged steel for superior strength. Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1-1/4" tongue hole size. Protected by a highly durable powder coat finish. Trailer ball and hitch pin sold separately.

Have a special application not covered by a traditional trailer hitch? Use these weld on, tubes to fabricate your own receivers, comes sized with collar.

Have a special application not covered by a traditional trailer hitch? Use these weld on, tubes to fabricate your own receivers, comes sized with collar.

Distinctive Reese safety chain loop for use with fabricated receivers, large loops for easy chain hookup.

Tri-Ball Ball Mount, 2" Sq. Hollow Shank w/Chrome 1-7/8", 2", & 2-5/16" Balls - Chrome.

TRIMAX 2.5" to 2" Aluminum Adapter Sleeve. For use with the new Ford 250, 350 and GMC/Chevy 2500, 3500 Trucks that have the 2.5" Wide Receiver Hitch.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes, 2" and 2-5/16" eliminate the need for multiple ball mounts.

Fastway® Flash™ Simple ball mounts give you lightning-quick adjustments and stunning good looks. Each Flash ball mount is precision-machined in the Mountain West with the highest quality materials, making it stronger and longer lasting than other aluminum ball mounts. If you are looking for a strong, reliable and attractive pin-style ball mount, look no further. The Fastway Flash Simple ball mount is superior in strength and craftsmanship, and its hand polished aluminum outshines the competition with a gorgeous, mirror finish. Proudly made in America. The Flash™ Simple is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability and peace of mind. The Flash™ Simple is made to fit your 2" receiver and includes 2" & 2-5/16" chrome hitch balls, making it a great choice for towing multiple trailers. 10,000 lbs. GTW. Tow up to 8,000 lbs. with the 2" ball and up to 10,000 lbs. with the 2-5/16" ball.

Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1" tongue hole size. Protected by a durable powder coat finish. Trailer ball and hitch pin sold separately.

Fits trailer hitches with a 2" X 2" receiver tube opening. Equipped with a 1" tongue hole size. Protected by a durable powder coat finish. Trailer ball and hitch pin sold separately.

Made from a solid piece of aircraft-grade aluminum, the HD resists rust, is incredibly strong, and surprisingly light. It looks fantastic on your truck, and commands attention with its hand polished, mirror finish. If you are looking for a heavy duty ball mount that is tough enough for your heaviest toys and made to fit your 2-1/2" receiver, look no further. You will not find a stronger, higher quality ball mount than the Simple HD. Proudly made in America. The Flash™ Simple HD is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability, and peace of mind. The Simple HD is rated at 1,800 lb. max tongue wt. and 18,000 lb. max trailer weight, making it the strongest aluminum ball mount on the market. The Flash™ Simple HD is made to fit your 2-1/2" receiver and includes 2" & 2-5/16" chrome hitch balls, making it a great choice for towing multiple trailers.

Have a special application not covered by a traditional trailer hitch? Use these weld on, tubes to fabricate your own receivers, comes sized with collar.

Have a special application not covered by a traditional trailer hitch? Use these weld on, tubes to fabricate your own receivers, comes sized with collar.

Provides user an extension for hard to reach receivers or other receiver mounted accessories. Solves towing 1/4Sharp turn” restrictions. 2” square receiver opening and solid steel shank bar. Corrosion resistant, black epoxy finish, reduces hitch capacity by 1/3.

Hook up with any trailer in town with the Trimax Aluminum Adjustable Ball Mount Hitch. Adjusts up and down in 1" increments and locks securely in place. Built from premium aluminum and polished to a pristine shine. Rated for up to 10,000 lbs. GTW and 1,500 lbs. tongue weight. Comes with a locking hitch pin and a dual-head hitch ball 2-5/16" and 2".

Tri-Ball ball mount, 2" square solid shank with chrome 1-7/8", 2" & 2-5/16" balls, black.

Hitch-Pin Style Polished Aluminum Ball Mount Class V - 2,000lbs. Tongue /14,000 lbs Trailer.

Sleeve Adapter Reducer sleeve from 2-1/2" to 2".

Titan®, Ball Mount, 2-1/2" Sq. Hollow Shank, 13,000 - 14,000 lbs. GTW, 1-1/4" Ball Hole, Black

Made from a solid piece of aircraft-grade aluminum, the HD resists rust, is incredibly strong, and surprisingly light. It looks fantastic on your truck, and commands attention with its hand polished, mirror finish. If you are looking for a heavy duty ball mount that is tough enough for your heaviest toys and made to fit your 2-1/2" receiver, look no further. You will not find a stronger, higher quality ball mount than the Simple HD. Proudly made in America. The Flash™ Simple HD is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability, and peace of mind. The Simple HD is rated at 1,800 lb. max tongue wt. and 18,000 lb. max trailer weight, making it the strongest aluminum ball mount on the market. The Flash™ Simple HD is made to fit your 2-1/2" receiver and includes 2" & 2-5/16" chrome hitch balls, making it a great choice for towing multiple trailers.

Fastway® Flash™ Simple ball mounts give you lightning-quick adjustments and stunning good looks. Each Flash ball mount is precision-machined in the Mountain West with the highest quality materials, making it stronger and longer lasting than other aluminum ball mounts. If you are looking for a strong, reliable and attractive pin-style ball mount, look no further. The Fastway Flash Simple ball mount is superior in strength and craftsmanship, and its hand polished aluminum outshines the competition with a gorgeous, mirror finish. Proudly made in America. The Flash™ Simple is 100% American-made from aircraft-grade aluminum, for exceptional quality, durability and peace of mind. The Flash™ Simple is made to fit your 2" receiver and includes 2" & 2-5/16" chrome hitch balls, making it a great choice for towing multiple trailers. 10,000 lbs. GTW. Tow up to 8,000 lbs. with the 2" ball and up to 10,000 lbs. with the 2-5/16" ball.

The Fastway® Shin Guard™ is a soft injection molded sleeve designed to slip over an installed hitch ball and cover the exposed end of the shank or Stinger to protect your shins from a painful bump. Fits easily over 2" or 2-5/16" hitch balls and up to a 2-1/2" wide ball mount. Each includes a handy adjustable tether loop to keep your trailer wiring harness up off the ground so it won't drag, and is right where you need it when you're ready to hook up.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes, 2" and 2-5/16" eliminate the need for multiple ball mounts.

This adjustable pintle mount is designed to accept a bolt-on pintle hook or combination ball and pintle. This pintle mount offers a gross trailer weight capacity up to 10,000 lb and features a total plate height of 13", providing up to 11-1/2" of drop. Features: Fits 2" receivers, six-position height adjustment allows for precise trailer leveling, Solid steel construction, powder coat finish, Limited lifetime warranty (one-year finish, one-year parts). Face plate holes spaced apart 1-3/4" high X 3-5/16" wide. Dimensions: 5" W X 13" H X 12-1/2" D. Weight: 24 lb. NOTE: For use in drop position only.

Class V, One-Piece forged hitch ball mounts for 3 inch receivers. Designed to handle heavy-duty loads. Black powder coat; Angled easy load design. 1-1/4" Ball Hole Size. GTW 21,000 lbs, TW 2,100 lbs.

Class V, One-Piece forged hitch ball mounts for 3 inch receivers. Designed to handle heavy-duty loads. Black powder coat; Angled easy load design. 1-1/4" Ball Hole Size. GTW 21,000 lbs, TW 2,100 lbs.

Fastway® Flash™ Adjustable Locking Ball Mounts (ALBM) give you lightning-quick adjustments, offer superior strength, maximum theft protection and stunning good looks with its hand-polished shine. The dual 2” & 2-5/16” hitch balls make towing different trailers a snap, thus; the O-Ring sealed overlapping stainless steel slide pins have been shear tested to 20,000 Lb. Each ALBM is precision-machined and there is no other aluminum ball mount on the market that is stronger, better built, or harder to steal. 1,000 lb. max tongue weight. / 10,000 lb. max trailer weight. Limited 1 year warranty.

Fastway® Flash™ Adjustable Locking Ball Mounts (ALBM) give you lightning-quick adjustments, offer superior strength, maximum theft protection and stunning good looks with its hand-polished shine. The dual 2" & 2-5/16" hitch balls make towing different trailers a snap, thus; the O-Ring sealed overlapping stainless steel slide pins have been shear tested to 20,000 Lb. Each ALBM is precision-machined and there is no other aluminum ball mount on the market that is stronger, better built, or harder to steal. 1,000 lb. max tongue weight. / 10,000 lb. max trailer weight. Limited 1 year warranty.

Stows under the vehicle when not in use. Fits any standard 2" receiver. Height adjusts in 1" increments, Solid stainless steel pins, Durable Black powder-coat finish. 2 process plating to help prevent corrosion. Multiple ball sizes, 2" and 2-5/16" eliminate the need for multiple ball mounts.

Pintle Hitch Adjustable Ball Mount Add-On. Allows you to use a lunette ring connection. Reduces vertical and horizontal movement compared to a conventional pintle hitch. Simple operation.

High-strength carbon steel construction. Protected by a highly durable carbide powder coat finish.

REESE starter kits come complete with everything you need to set up your trailer hitch and tow safely. Fits a 2" receiver hitch and has a 2" drop. It has a maximum towing capacity of 2,000 lbs. and includes a 1-7/8" Trailer Ball and Pin & Clip.