5106 Magnet Kit for Dexter Axle 10" x 2-1/4";"

DC200 Dust Cap, Non Lubbed 2K - 3.5k

Magnet kit contains brake magnet/green lead wire, magnet retainer clip and magnet spring.

The Bearing Protector provides permanent protection against damage from water and dirt entering the wheel bearings.

Universal Rubber Plug For Lubed Dust Caps

LM-67010 Outer Cup

Seal for use with L-68149 bearing

Dust Cap, Non Lubed for 5.2k and 6k, OD 2-7/16"

Bearing Kit for 1250Lb W/1" Spindle (L-44643, L-44643, L-44610, L-44610, Seal, & Pin)"

The Bearing Protector provides permanent protection against damage from water and dirt entering the wheel bearings.

High quality axle bearing.

High quality axle bearing.

Grease seals designed for RV and trailer use.

High quality axle bearing.

The Lippert trailer bearing replacement kit offers an essential solution for maintaining smooth operation and longevity of 5,200-lb. trailer axle hubs, featuring a 2.25" inner diameter seal for reliable protection and optimal performance on the road. Kit Includes: (1) inner bearing cone, (1) outer bearing cone, (1) inner bearing race, (1) outer bearing race, (1) 2.25" ID double lip grease seal, (1) 1.75" cotter pin, (1) 1.5" tang spindle washer.

This is a 2-pack of replacement shaft oil seals that fit Lippert and Dexter 5,200 to 8,000-lb. trailer axle hubs with oil or grease lubrication. Hub bore diameter: 3.372". Spindle diameter: 2.25". Width: 1/2".

This is a 2-pack of replacement wheel end oil seals that fit Lippert and Dexter 10,000-lb. trailer axle hubs with oil or grease lubrication. Hub bore diameter: 3.875". Spindle diameter: 2.875". Width: 1/2".

Equalizer assembly with nylon bushing.

Shields bearings, grease, and other inner hub components from dust and contaminants.

Equalizer assembly with nylon bushing.

Replacement grease seal for single, tandem and triple axle applications.

1"-14 UNS Thread.

Axle Leaf Spring Hangers.

Adjusting Screw Kit ( Spring & Screw Assembly) for AL-KO-10" x 2-1/4"; 12: x 2"; Dexter-10X1-1/2"; 10" x 2-1/4";12" x 2" 7K; Hayes-10" x 1-15/8"; 10" x 2-1/4"; 12" x 2" Centerline; Fayette 10" x 2-1/4"; 12" x 2"

High quality axle bearing.

Secures wheel to brake drum, wheel bolt 1/2"- 20.

Grease seals designed for RV and trailer use.

Bearing Kit for 1250Lb W/1" Spindle (L-44643, L-44643, L-44610, L-44610, Seal, & Pin)"

Magnet kit contains brake magnet/green lead wire, magnet retainer clip and magnet spring.

LM-67010 Outer Cup

Shoe & Lining Kit (Wheel Set) for Dexter 12" x 2" 7k

The Lippert complete pre-greased hub assembly kit offers an essential solution for maintaining smooth operation and longevity of 3,500-lb. trailer axle hubs. It comes with everything you need, including a brake hub assembly, dust cap, cotter pin, 6-slot castle spindle nut, round spindle washer, and five 60° cone trailer lug nuts.

The Lippert dust cap replacement kit offers an essential solution for maintaining smooth operation and longevity of trailer axle hubs. Includes: (2) Dust caps, (2) Universal rubber inserts.

The Lippert trailer bearing replacement kit offers an essential solution for maintaining smooth operation and longevity of 3,500-lb. trailer axle hubs, featuring a 1.719" inner diameter seal for reliable protection and optimal performance on the road. Kit Includes: (1) inner / outer bearing cone, (1) inner / outer bearing race, (1) inner bearing cone, (1) Inner bearing race, (1) 1.719" ID double lip grease seal, (1) 1.75" cotter pin, (1) 1.5" tang spindle washer.

The complete pre-greased hub assembly kit offers an essential solution for maintaining smooth operation and longevity of 7,000-lb. trailer axle hubs. It comes with everything you need, including pre-installed bearings, a brake hub assembly, dust cap, cotter pin, 6-slot castle spindle nut, round spindle washer, and eight 60° cone trailer lug nuts.

The Lippert dust cap replacement kit offers an essential solution for maintaining smooth operation and longevity of trailer axle hubs. Includes: (2) Dust caps, (2) Universal rubber inserts.

Leaf Spring Bushing

Axle Leaf Spring Hangers.

Over/under conversion kit.

OEM replacement for single, tandem and triple axle applications.

OEM replacement for single, tandem and triple axle applications.

Equalizer assembly with nylon bushing.

Over/under conversion kit.

Replacement grease seal for single, tandem and triple axle applications.

Equalizer assembly with nylon bushing.

Replacement grease seal for single, tandem and triple axle applications.

High quality wheel bearing kit fits 1" straight spindle.

Return Spring Set Axle Set for Dexter-10" x 1-1/2"

Grease seals designed for RV and trailer use.

These shoe and lining kits are manufactured to exact OEM specifications.

Dust Cap, Non Lubed for 5.2k and 6k, OD 2-7/16"

Dust Cap, Non Lubed for 5.2k and 6k, OD 2-7/16"

Dust Cap, Non Lubed for 5.2k and 6k, OD 2-7/16"

Dust Cap, Non Lubed for 5.2k and 6k, OD 2-7/16"

This is a replacement 2-pack of double lip grease seals that fit Lippert and Dexter trailer axle hubs with grease lubrication.

Replacement 2-pack of dust caps. Dust caps shield bearings, grease, and other inner hub components from dust and contaminants. Bearings and bearing grease should be visually inspected every 12,000 miles or every 12 months, whichever comes first.

This is a replacement 2-pack of double lip grease seals that fit Lippert and Dexter trailer axle hubs with grease lubrication.

The Lippert dust cap replacement kit offers an essential solution for maintaining smooth operation and longevity of trailer axle hubs. Includes: (2) Dust caps, (2) Universal rubber inserts.

This is a replacement 4-pack of 9/16"-18 X 2.31" wheel lug studs for use on axles with a weight capacity from 5,200 to 7,000 lbs. Please consult your original equipment before purchasing. Thread size: 9/16"-18 UNF. Length: 2.31" from underhead to end. Spline diameter: 0.617". Head diameter: 0.77". Axle Capacity: 5,200 lbs., 6,000 lbs., 7,000 lbs.

The complete pre-greased hub assembly kit offers an essential solution for maintaining smooth operation and longevity of 7,000-lb. trailer axle hubs. It comes with everything you need, including pre-installed bearings, a brake hub assembly, dust cap, cotter pin, 6-slot castle spindle nut, round spindle washer, and eight 60° cone trailer lug nuts.

Replacement outer races/cups for single, tandem and triple axle applications.

Shields bearings, grease, and other inner hub components from dust and contaminants.

Replacement bearings for single, tandem and triple axle applications.

Replacement magnet kit with spring and clip.

Replacement bearings for single, tandem and triple axle applications.

Replacement 1" round spindle washer for brake assemblies.

The Rubber Plug is a single trailer wheel bearing dust cap plug for lubed dust caps. Universal fit.

Replacement grease seal for single, tandem and triple axle applications.

Replacement bearings for single, tandem and triple axle applications.

Replacement outer races/cups for single, tandem and triple axle applications.

High quality tapered roller Axle Bearing.

Hardware Kit for Dexter -7" x 1-1/4" consisting of: Return Spring, Hold Down Clips, Screw Spring & Adjusting Screw Assembly.

High quality axle bearing.

These shoe and lining kits are manufactured to exact OEM specifications.

Magnet Retaining Ring for use on 10 x 1-5/8" Hayes, 10 x 2-1/4" Hayes (Old Style) and 12 x 2 Hayes (Old Style).

Bearing Kit For 6000Lb Axle (25580, 15123, 25520, 15245, Seal, & Pin).

LM-67010 Outer Cup

Adjustment screw kit contains: (1) adjustment screw assembly, (1) adjustment spring

Kit de roulement pour essieu de 7000 lb.

Seal for use with L-68149 bearing

The Bearing Protector provides permanent protection against damage from water and dirt entering the wheel bearings.

This is a 2-pack of replacement wheel end oil seals that fit Lippert and Dexter 12,000 to 16,000-lb. trailer axle hubs with oil or grease lubrication. Hub bore diameter: 4.5". Spindle diameter: 3.125". Width: 3/5".

The Lippert trailer bearing replacement kit offers an essential solution for maintaining smooth operation and longevity of 7,000-lb. trailer axle hubs, featuring a 2.25" inner diameter seal for reliable protection and optimal performance on the road. Kit Includes: (1) inner bearing cone, (1) outer bearing cone, (1) inner bearing race, (1) outer bearing race, (1) 2.25" ID double lip grease seal, (1) 1.75" cotter pin, (1) 1.5" tang spindle washer.

The Lippert complete pre-greased hub assembly kit offers an essential solution for maintaining smooth operation and longevity of 3,500-lb. trailer axle hubs. It comes with everything you need, including pre-installed bearings, a brake hub assembly, dust cap, cotter pin, 6-slot castle spindle nut, round spindle washer, and five 60° cone trailer lug nuts.

Replacement 2-pack of dust caps. Dust caps shield bearings, grease, and other inner hub components from dust and contaminants. Bearings and bearing grease should be visually inspected every 12,000 miles or every 12 months, whichever comes first.

3" Tie Plate. Fits 2" wide Slipper Spring. Zinc.

Shock and mounting hardware enables you to install shock to axle's suspension. Axle must have appropriate tie plate and frame mount in which to bolt shock to. Includes: Shock for 2-3/8" & 3" axle tubes and hardware.

Replacement outer races/cups for single, tandem and triple axle applications.

Replacement inner races/cups for single, tandem and triple axle applications.

Shackle links & Bolt assemblies.

Threaded shoulder bolt with a hex style head. 2.32" X 9/16". 7/16"-20 thread size.

Equalizer assembly with nylon bushing.

OEM replacement for single, tandem and triple axle applications.

OEM replacement for single, tandem and triple axle applications.

Shackle links & Bolt assemblies.

Replacement bearings for single, tandem and triple axle applications.

Shoe & Lining Kit for 10 inch Electric Brakes.

Axle Leaf Spring Hangers.

Shields bearings, grease, and other inner hub components from dust and contaminants.

Leaf Spring Seat.

Shields bearings, grease, and other inner hub components from dust and contaminants.

Leaf Spring Seat.

Replacement 1" D-flat spindle washers for brake assemblies.

Hold down Kit (Axle Set) for ALKO- 10" x 2-1/4; 12" x 2"; Dexter-10" x 2-1/4"; 12" x 2" 7K; Fayette-10" x 2-1/4";Hayes-12" x 2"; 12" x 2" Centerline; Fayette-10" x 2-1/4"; 12" x 2".

25520 Inner Cup

Grease Cap Sxle Set for AL-KO-12" x 2"; Dexter-12" x 2"; 12" x 2" 7K; Hayes-12" x 2"; 12" x 2" Centerline; Fayette-12" x 2"

Includes Cup (14276) and Cone (14125A) - PRODUCT NOT VEHICLE SPECIFIC

High quality axle bearing.

Grease seals designed for RV and trailer use.

Grease seals designed for RV and trailer use.

High quality axle bearing.

Shoe & Lining Kit( Wheel Set) for

Bearing Kit for 1250Lb W/1" Spindle (L-44643, L-44643, L-44610, L-44610, Seal, & Pin)"

DC250 Dust Cap, non Lubed 5.2k - 6k

Seal for use with L-68149 bearing

Seal for use with L-68149 bearing

Shoe & Lining Kit (Wheel Set) for AL-KO 12" x 2"

Magnet Kit for AL-KO 12" x 2" - 6 & 7k

This is a replacement 6-pack of 1/2"-20 X 2" wheel lug studs for use on axles with a weight capacity from 2,000 to 7,000 lbs. Please consult your original equipment before purchasing. Thread size: 1/2"-20 UNF. Length: 2" from underhead to end. Spline diameter: 0.617". Head diameter: 0.77". Axle Capacity: 2,000 lbs., 2,200 lbs., 3,000 lbs., 4,000 lbs., 4,400 lbs., 5,000 lbs., 5,200 lbs., 6,000 lbs., 7,000 lbs.

The Lippert complete pre-greased hub assembly kit offers an essential solution for maintaining smooth operation and longevity of 6,000-lb. trailer axle hubs. It comes with everything you need, including pre-installed bearings, a brake hub assembly, dust cap, cotter pin, 6-slot castle spindle nut, round spindle washer, and six 60° cone trailer lug nuts.

Replacement 2-pack of dust caps. Dust caps shield bearings, grease, and other inner hub components from dust and contaminants. Bearings and bearing grease should be visually inspected every 12,000 miles or every 12 months, whichever comes first.

Axle leaf spring shackle link with 3-1/8" length from hole center to hole center.

Shields bearings, grease, and other inner hub components from dust and contaminants.

High quality tapered roller Axle Bearing.

Shields bearings, grease, and other inner hub components from dust and contaminants.

Leaf Spring Bushing

Replacement magnet kit with spring and clip.

Axle Leaf Spring Hangers.

Replacement inner races/cups for single, tandem and triple axle applications.

Replacement bearings for single, tandem and triple axle applications.

Replacement outer races/cups for single, tandem and triple axle applications.

Adjusting Screw Kit (Spring & Screw Assembly) for AL-KO-10" X 2-1/4", 12: X 2", Dexter-10" X 1-1/2", 10" X 2-1/4", 12" X 2" 7K, Hayes-10" X 1-15/8", 10" X 2-1/4", 12" X 2" Centerline, Fayette 10" X 2-1/4", 12" X 2".

Shoe & Lining Kit for 12 inch Electric Brakes.

Axle leaf spring shackle link with 2-1/4" length from hole center to hole center.

Press-in wheel stud with a 1/2"-20 UNF thread size, and 1.84" thread length. 0.617" knurl diameter.